Place of Origin: | CHINA |
Brand Name: | kacise |
Certification: | CE |
Model Number: | KNT601 |
Minimum Order Quantity: | 0-100 |
---|---|
Price: | $0-$600 |
Packaging Details: | Common package or custom package |
Delivery Time: | 3-10days |
Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Supply Ability: | 100 |
Measuring Principle: | Scattering Light Method | Measuring Range/Resolution: | 0~1000NTU/0.1NTU /0.1℃ 0~100NTU /0.1NTU /0.1℃ 0~20NTU /0.01NTU/0.1℃ |
---|---|---|---|
Accuracy: | ±5% Or ±3NTU(0~1000NTU) ±3% Or ±2NTU(0~100NTU) ±3% Or±1.5NTU(0~20NTU) ±0.5℃ | Calibration Mode: | Two-point Calibration |
Temperature Compensation: | Automatic Temperature Compensation(Pt1000) | Output Mode: | RS-485( Modbus /RTU) |
High Light: | Two point calibration online turbidity sensor,Scattering light method online turbidity sensor,Pt1000 water turbidity sensor |
KNT601 Online Turbidity Sensor
1.Working Principle
KNT601 integrated online turbidity sensor is designed and manufactured using the principle of scattered light turbidity measurement. When a beam of light is incident on a water sample, the light is scattered by the turbidity substance in the water sample, and the intensity of the scattered light in the direction perpendicular to the incident light is measured and compared with the internal calibration value to calculate the turbidity in the water sample. Degree, linearized to output the final value.
2.Feature
Model | KNT601 |
Measuring principle | Scattering light method |
Measuring range/Resolution | 0~1000NTU/0.1NTU /0.1℃ |
0~100NTU /0.1NTU /0.1℃ | |
0~20NTU /0.01NTU/0.1℃ | |
Accuracy | ±5% or ±3NTU(0~1000NTU) |
Calibration mode | Two-point calibration |
temperature compensation | Automatic temperature compensation(Pt1000) |
Output mode | RS-485( Modbus /RTU) |
Working conditions | 0~50℃,<0.2MPa |
Storage temperature | -5~65℃ |
Installation mode | Immersive installation, 3/4NPT thread |
Cable length | 5 meters, other lengths customizable |
power dissipation | <0.3 W@12 V |
source | 12~24 VDC ±10% |
levels of protection | IP68 |
Note:The sensor connector is m16-5 core waterproof connector male.
Installation distance requirements: keep above 5 cm with side wall and above 10 cm with bottom.
After the wiring is completed, it should be carefully checked to avoid the wrong connection before the power is turned on.
Cable specification: considering that the cable is immersed in water (including sea water) or exposed to air for a long time, the cable has a certain corrosion resistance. All interfaces of cable outer diameter Φ6mm, have been waterproof.
6.1.1 Maintenance Schedule
The cleanliness of the measuring window is very important for maintaining accurate readings.
Maintenance task | Recommended maintenance frequency |
Calibrate sensors (If required by the competent authority) | According to the maintenance schedule required by the competent department |
6.1.2 Maintenance Method
6.1.3 Matters Need Attention
The probe contains sensitive optical and electronic components. Make sure the probe is not subjected to severe mechanical impact. There are no components inside the probe that need to be maintained by the user.
a) Zero calibration: take proper amount of zero turbidity solution with large beaker, put the sensor vertically in the solution, the front end of the sensor is at least 10 cm from the bottom of the beaker, and the zero calibration will be carried out after the value is stabilized for 3 minutes. The instructions refer to the appendix.
b) Slope calibration: the sensor probe is placed in the standard solution, the front end of the sensor is at least 10 cm from the bottom of the beaker, and the slope calibration is carried out after 3 ≤ 5 minutes of numerical stability. The instructions refer to the appendix.
Wrong | Probable Cause | Solution |
The operating interface cannot connect or does not display the measurement results | The measured value is too high, too low, or the numerical value remains unstable. | Reconnect the controller and cable. |
Cable failure | Please contact us. | |
The measured value is too high, too low, or the numerical value remains unstable. | The sensor window is attached to the external object. | Clean the window surface of the sensor. |
This product includes:
The Company has provided the local after-sales service within one year from the date of sales, but does not include the damage caused by improper use. If it is necessary to repair or adjust it, please return it, but the freight is required to be self-contained. When it is returned, it shall be confirmed that the package is good to avoid damage during transportation. The Company will repair the damage of the instrument free of charge.
Website www.kacise.com
Phone +86-17719566736
Email sales@kacise.com
Location Tangyan South Road, High-tech Zone, Xi'an City, Shaanxi Province, China
Contact Person: Ms. Evelyn Wang
Tel: +86 17719566736
Fax: 86--17719566736
Address: i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.
Factory Address:i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.